Guides · Moulding & trim
Trim that looks measured, not guessed.
Board and batten and picture-frame moulding are cheap in materials and expensive in attention. The difference between a wall that looks original to the house and one that looks stuck on is mostly proportion: the spacing between battens, the height of the panelled zone, the margin around each box.
These guides give you decision rules rather than vague advice. How to choose spacing that lands evenly at both ends. How high to run batten relative to ceiling height and furniture. How to size moulding boxes so they share a margin and read as a set. When to mitre and when to cope. And the caulk, filler and paint steps that make MDF look like joinery. The layout calculators use the same rules, so the numbers carry straight over.
8 guides on moulding & trim
Moulding & trim
Wainscoting vs Board and Batten vs Shiplap: Which to Choose
Wainscoting vs board and batten vs shiplap: what each term really means, how the looks differ, and the material, skill and cost each needs on a 12 ft wall.
7 min read
Moulding & trim
Picture Frame Moulding: How to Size and Space the Boxes
Picture frame moulding box sizes made easy: the formula for equal boxes, margins and gaps, a chair rail at one third, and a worked 12 ft wall and cut list.
8 min read
Moulding & trim
Modern Grid Wall Moulding: Plan Even Squares on Any Wall
Plan a modern grid wall with moulding: get even squares in both directions, work out the cut list, and pick strip size, fixings and paint. Worked 10 ft example.
7 min read
Moulding & trim
Mitre vs Cope: How to Join Moulding Corners Without Gaps
Mitre vs cope for moulding corners: when to use each joint, how to cut out-of-square corners, and why picture frame boxes need eight mitre cuts each.
7 min read
Moulding & trim
How to Caulk, Fill and Paint MDF Trim for a Seamless Finish
How to caulk, fill and paint MDF trim: seal cut edges, fill nail holes and seams, caulk the right joints, and paint board and batten so it looks built-in.
7 min read
Moulding & trim
Board and Batten Spacing: How Far Apart Should Battens Be?
Board and batten spacing made simple: pick a target, round to whole gaps, and get an even layout that lands a batten at both ends. Worked 12 ft example.
8 min read
Moulding & trim
MDF vs Pine vs PVC for Board and Batten: Which Should You Buy?
MDF vs pine vs PVC for board and batten: how each cuts, holds nails, handles moisture and paints, with thickness advice and an illustrative cost for one wall.
7 min read
Moulding & trim
How High Should Board and Batten Go? Heights That Look Right
How high should board and batten go? Compare one-third, 48 in, 60 in, two-thirds and full-height layouts, plus the board count each height costs you.
7 min read
Worked ideas to start from
All accent wall ideasHome office · Picture-frame moulding
Bottle-green full-height moulding in a library office
moderate2 days$150–$280 in materials (illustrative)
Nursery · Board & batten
Chalky blue board and batten behind a nursery crib
moderate2 days$160–$300 in materials (illustrative)
Bathroom · Board & batten
Forest-green PVC board and batten in a family bathroom
moderate2 days$180–$340 in materials (illustrative)