How to use the paint calculator
You need a tape measure and the label of the paint you're eyeing. Work in feet or meters; the math underneath is identical.
- Pick single wall or whole room. For one accent wall, enter its width and height. For a full room, switch to Whole room and enter length, width and ceiling height. The tool multiplies the perimeter by the height.
- Add doors and windows. Tap Door (3′ × 6′8″) or Window (3′ × 4′) for standard sizes, or add a custom opening. Each one comes off the paintable area.
- Set coats and surface. Choose 1, 2 or 3 coats, then a coverage preset: 400 ft² per gallon for smooth or previously painted walls, 325 for texture, 275 for new drywall. If your label says something different, the label wins.
- Decide on primer. Turn primer on for bare drywall, patches, stains or a big color change. It's counted as one coat at 300 ft² per can.
- Check prices and allowance. Defaults are an illustrative $52 a can for paint and $34 for primer, with a 10% allowance. Swap in real prices and keep the allowance unless you have a good reason.
The formula, explained
Every number in the result comes from two lines. Cans = round up (net area × coats × (1 + allowance) ÷ coverage). Primer cans = round up (net area × (1 + allowance) ÷ primer coverage). Net area is wall area minus openings. Rounding happens once, at the very end, never per coat.
Here is an ordinary bedroom run through the calculator with the smooth-wall preset, two coats and the default 10% allowance.
- Perimeter: 12 + 14 + 12 + 14 = 52 ft (15.85 m)
- Gross wall area: 52 × 8 = 416 ft² (38.6 m²)
- Openings: door 3′ × 6′8″ = 20 ft², window 3′ × 4′ = 12 ft²
- Net area: 416 − 32 = 384 ft² (35.7 m²)
- Paint needed: 384 × 2 coats × 1.10 = 844.8 ft²
- 844.8 ÷ 400 ft² per can = 2.11 cans → round up to 3
- Primer: 384 × 1.10 ÷ 300 = 1.41 cans → round up to 2
- Illustrative cost: 3 × $52 + 2 × $34 = $224
Buy 3 cans of paint, plus 2 of primer if the walls need it. Without the allowance the same room works out to 1.92 cans, which rounds to 2. That 10% is the difference between finishing and a second trip to the store.
Tip. A result like 2.11 is a borderline call. If your label promises 425 ft² per gallon on smooth walls, 844.8 ÷ 425 = 1.99 and two cans do the job. Enter the label's number, not your hope.
What surface and coats do to the count
The presets are illustrative starting points, not promises. Texture eats paint because there is more real surface per square foot. Bare drywall drinks the first coat before it lets anything sit on top.
Read the table sideways. On smooth and textured walls, a third coat adds one can. On new drywall, going from one coat to two doubles the order. Priming first and then using smooth coverage for two topcoats costs about the same here ($224 against $208, illustrative), but it gives you a sealed, even base, which is why paint labels usually ask for it on new drywall.
| Surface preset | 1 coat | 2 coats | 3 coats |
|---|---|---|---|
| Smooth or previously painted (400 ft²) | 2 | 3 | 4 |
| Textured (325 ft²) | 2 | 3 | 4 |
| New drywall (275 ft²) | 2 | 4 | 5 |
Primer or an extra coat? A decision rule
Primer is a sealer and a bonding layer, not a cheaper first coat. Use it when the surface is the problem. Use another topcoat when the color is the problem. The full reasoning lives in primer or an extra coat.
- Prime bare drywall, joint-compound patches, glossy old paint, water or smoke stains, and raw wood.
- Prime, tinted if offered, when going from very dark to very light, or from light to a deep, saturated color.
- Skip primer on clean, sound, previously painted walls in a similar color. A second topcoat does more good.
- Plan a third coat for saturated reds, yellows and oranges, which often look streaky after two. See coats for dark and bold colors.
Common mistakes
Most shortages and surplus cans come from the same handful of habits.
- Rounding each coat separately. One coat of the bedroom is 1.06 cans, so it looks like 2 + 2 = 4. Total first: 2.11 cans, so 3.
- Deducting tiny openings. Outlets and switch plates aren't worth subtracting. Doors, windows and built-ins are.
- Trusting the best number on the label. If the label gives a range, use the low end for texture, porous patches or a big color change.
- Painting a room when you meant a wall. A single 12′ × 8′ accent wall at two coats needs 0.53 cans, so one can, with some left for touch-ups.
- Mixing cans mid-wall. With two or more cans, pour them into one bucket and stir before you start. Small batch differences show on a flat wall.
- Zeroing the allowance to save a can. Rollers, trays and a dry first coat all absorb paint the label never accounts for.
Questions people ask
How many square feet does a gallon of paint cover?
Interior wall paint labels commonly quote somewhere around 350 to 400 ft² per gallon (about 8.5 to 10 m² per liter) on smooth, sealed walls. That drops on texture, bare drywall and porous plaster. The presets here, 400, 325 and 275 ft², are illustrative. Your can's label is the number to trust.
Does whole room mode include the ceiling?
No. It multiplies the room's perimeter by the ceiling height, so it covers walls only. Ceilings usually take a different flat white and a different coverage figure. To estimate one, use single wall mode and enter the room's length and width as the wall's width and height.
Should I subtract doors and windows?
Yes for doors, windows and anything else you won't paint. In the bedroom example, the door and window drop the raw figure from 2.29 to 2.11 cans. That doesn't change the order here, but on a room with a wall of windows or a pair of closet doors it often saves a can. More in measuring around windows and doors.
Why round up instead of to the nearest can?
Because 0.4 of a can still has to come from somewhere. Rounding to the nearest can would leave you short on any result just above a whole number. Rounding up once, after totaling every coat, keeps the order as small as it can safely be.
What is the 10% allowance for?
Paint left in the tray and roller, a thirsty first coat, drips and touch-ups. Raise it toward 15% for heavy texture or your first paint job. Lowering it only makes sense on small, smooth walls, and even then the rounding usually decides the order. See how much extra to buy.
How much leftover paint should I keep?
Enough for touch-ups: a small, airtight container labeled with the room, the color and the date. Store it somewhere that doesn't freeze or bake. Our guide to touch-ups and leftover storage covers the details.
Estimates are for planning. Prices are illustrative, not quotes; check the product label and your supplier before you order.