On this page
Key takeaways
- Box width = (wall width − 2 × margin − (boxes − 1) × gap) ÷ boxes. Solve it before you buy a single stick.
- Keep the margin at the wall edges equal to the gap between boxes, so every reveal around every box matches.
- Stack upper and lower boxes on the same vertical lines; mismatched widths are the most common giveaway of a rushed job.
- A chair rail at about one third of the wall gives short boxes below and tall boxes above, the classic proportion.
- Every box is four mitred pieces and eight mitre cuts; budget time, blades and a few spare sticks accordingly.
The box formula
Picture frame moulding is a row of rectangles applied to a flat wall. Three numbers decide everything: how many boxes across, the margin between the outer boxes and the wall edges, and the gap between neighbouring boxes. Once those are fixed, the box width is not a choice. It is what is left over, divided evenly.
Subtract both margins and all the gaps from the wall width, then divide by the number of boxes. Box height works the same way within each horizontal zone. RoomBatch's picture frame moulding calculator does this for you and then packs every box side into stock lengths, longest pieces first, to tell you how many sticks to buy.
- Box width = (wall width − 2 × margin − (boxes − 1) × gap) ÷ boxes
- Lower box height (with chair rail) = one third of wall height − 2 × margin
- Upper box height = remaining two thirds − 2 × margin, divided between upper rows
- Mitre cuts = boxes × 8
Worked example: a 12 ft by 8 ft wall
Take a wall 144 in wide and 96 in tall (3.66 × 2.44 m). Choose three boxes across, two rows (one below a chair rail, one above), a 4 in margin and a 4 in gap. Box width is (144 − 8 − 8) ÷ 3 = 42.67 in, about 42 11/16 in. The chair rail sits at one third of the height, 32 in, so the lower boxes are 32 − 8 = 24 in tall. The upper zone is 64 in, so the upper boxes are 64 − 8 = 56 in tall.
That gives six boxes, 48 mitre cuts and about 95 linear ft of moulding including a 144 in chair rail. Packed into 8 ft sticks, RoomBatch gets 14 sticks; with a 10% allowance you buy 16. The packing matters: each 8 ft stick yields two 42.67 in box tops with 10.67 in to spare, and the 24 in sides drop neatly into longer offcuts.
| Boxes across (4 in margin and gap) | Box width | Lower × upper height | 8 ft sticks (with 10%) |
|---|---|---|---|
| 3 | 42.67 in | 24 × 56 in | 16 |
| 4 | 31 in | 24 × 56 in | 17 |
| 5 | 24 in | 24 × 56 in | 19 |
Proportion rules that actually matter
First, make the margin equal the gap. When the reveal between a box and the wall corner matches the reveal between two boxes, the wall reads as one composed panel. Different reveals look like the boxes were placed one at a time.
Second, line up the stack. Upper and lower boxes should share exactly the same left and right edges. RoomBatch uses the same box width in every row for this reason. If an obstacle forces a narrower box somewhere, change it in both rows.
Third, commit to a shape. A box that is nearly square but not quite (say 30 by 33 in) looks like a measuring error. Make it a true square or a clearly rectangular box, roughly 1.4 to 1.6 times as tall as it is wide for upper boxes. Lower boxes under a chair rail usually look best square or slightly wider than tall.
| Margin and gap | Box width (3 across) | Lower × upper height | Look |
|---|---|---|---|
| 3 in | 44 in | 26 × 58 in | Tight, modern |
| 4 in | 42.67 in | 24 × 56 in | Balanced |
| 6 in | 40 in | 20 × 52 in | Airy, formal |
Chair rail at one third, and real-world trim
RoomBatch places the chair rail at one third of the wall height, which is 32 in on an 8 ft wall and 36 in on a 9 ft wall. Traditional chair rails often sit between 32 and 36 in, so on an 8 ft ceiling you may prefer to nudge it up a few inches by hand.
The calculator treats each zone as clean wall. On site, the baseboard and the chair rail itself take up space: a 5 in baseboard and a 2.5 in chair rail eat 7.5 in from the lower zone. Measure your margins from the top of the baseboard and from the edges of the chair rail, and the lower boxes come out shorter than the calculator's figure. Keep the same margin above and below each box so they still look centred.
Without a chair rail, two even rows of boxes on the same 12 ft by 8 ft wall come out at 42.67 by 42 in, nearly square. That is a case where three boxes across is the wrong count; try four (31 by 42 in) for clear vertical rectangles.
Working around windows, outlets and furniture
Openings are not modelled by the calculator, so handle them on paper. Under a window, a short box spanning exactly the window width (with the same margin each side) looks deliberate. Beside a window, let the boxes stop a full margin away from the casing.
Outlets usually fall inside the lower boxes. That is fine; a box frames an outlet more gracefully than a moulding line slicing through its cover plate. If a moulding line would cross a box, shift the layout by changing the box count or margin, not by bending one box around it. Moulding is usually shallow (often 1/2 to 3/4 in), so outlets inside a box stay on the original wall plane and need no extender.
With furniture, an odd number of boxes centres neatly behind a sofa or console. An even number puts a gap, rather than a box, at the centre line.
Marking, cutting and finishing
Mark the box corners with a level and a story stick, a strip of scrap with the margin, box width and gap marked on it. Measuring each box with a tape invites drift. Cut mitres a hair long and sneak up on the fit; a mitre that is 1/32 in short opens a gap you will have to fill.
Assemble each box flat on the floor if your moulding is stiff, gluing the mitres, then lift it to the wall. Otherwise fix the top piece to a level line and work around. Use a bead of construction adhesive and 18 or 23 gauge pins; small profiles split with bigger nails.
Finish with wood filler in the nail holes, a fine bead of paintable caulk where moulding meets wall, and paint. Painting wall and moulding one color in satin or eggshell is the most forgiving look; contrasting moulding shows every imperfect joint.
Questions people ask
How do you calculate picture frame moulding box size?
Subtract twice the edge margin and all the gaps between boxes from the wall width, then divide by the number of boxes. On a 144 in wall with three boxes and 4 in margins and gaps, each box is 42.67 in wide.
How far apart should picture frame moulding boxes be?
Most walls look right with 3 to 6 in between boxes. Use the same figure for the margin at the wall edges, ceiling and chair rail so every reveal matches.
How high should a chair rail be with picture frame moulding?
About one third of the wall height is the classic proportion: roughly 32 in on an 8 ft ceiling and 36 in on a 9 ft ceiling. Nudge it to clear window sills or furniture tops.
How much moulding do I need for picture frame boxes?
Add up four sides per box plus any chair rail, then pack the pieces into your stick length. Six boxes on a 12 by 8 ft wall need about 95 linear ft, which packs into 14 eight-foot sticks; buy 16 to allow for bad cuts.
Should picture frame boxes be square or rectangular?
Either, as long as the choice is clear. Squares or slightly wide boxes suit the short zone below a chair rail; tall rectangles about 1.4 to 1.6 times taller than wide suit the zone above. Avoid nearly-square boxes.
Terms in this guide
See it worked out
Sources & further reading
Planning information only. Product labels, manufacturer instructions and local codes take priority. Prices are illustrative. Read how we write and check guides in our editorial policy.