Staircase · Limewash · mediterranean warm
Cloudy ochre limewash up a two-story stairwell
Limewash the big wall that rises beside your stairs in a warm ochre. Stairwells are seen from below, from above and while moving, so the soft clouds of limewash keep changing as you climb. The hard part is access, not technique.
- Effort
- Involved
- Time
- 3 days
- Materials
- $200–$380 in materials, plus platform rental (illustrative)
The palette
- Wall
- Support
- Accent detail
- Extra
Why it works
- Tall walls look flat in paint. Limewash's mottling gives the height texture without adding anything to hit with a laundry basket.
- Ochre warms a stairwell, which is often the coolest, dimmest part of a house.
- Natural light from a landing window rakes across the wall and animates the texture through the day.
- Limewash is forgiving at joins between work sessions, which matters when you have to move a platform.
How to build it
Step 1
Plan safe access first
A 17-foot stair wall needs a proper platform: a stair ladder with adjustable legs plus a plank, or a rented stair scaffold. Never balance an extension ladder on a step. Set up so you can reach a 4-foot band comfortably without leaning. Budget most of day one for setup and prep.
Step 2
Prime and mask
Roll the limewash maker's mineral primer over the existing paint. Mask the stair stringer, handrail brackets and the window frame, and remove anything you can unscrew. Protect the treads with drop cloths taped down; limewash drips are thin and travel. Let the primer dry overnight.
Step 3
Work top down in bands
Start at the top in 4-foot horizontal bands and keep each band's lower edge ragged, not straight. A straight line where you stop will show as a stripe. Use crisscross strokes with a block brush and mist the wall lightly if it is drying too fast near the window.
Step 4
Second coat in the same order
Once the first coat is dry to the touch, go back to the top and repeat. Overlap bands with feathered edges. Step down to the hall below and look up often; the view from the bottom of the stairs is the one guests see.
Step 5
Clean up and protect
Wipe drips on trim right away with a damp cloth; dried lime is much harder to shift. Leave the handrail off the wall until the limewash has cured for a couple of days. Remount brackets carefully with the original screws in the original holes, as limewash scuffs show at fixing points.
Shopping notes
- About 229 sq ft of net wall after the window: two coats at 250 sq ft per gallon is just over two gallons, so buy three.
- Buy all containers from one batch and box them together before you start.
- Rent a stair platform or scaffold rather than improvising with ladders.
- A block brush for open areas and a 2-inch brush for edges at the stringer and window.
Avoid
- Stopping mid-wall with a straight horizontal edge.
- Working near the window in direct afternoon sun, which dries lime too fast and leaves lap marks.
- Trying to reach the top from an unsecured ladder on stairs.
Questions people ask
Can I do a stairwell myself?
If you rent or build proper access, yes. The technique is easy; working safely at height is the real skill.
How do I hide the joins between days?
Finish each session at a natural break such as the window or a corner, and keep edges feathered.
Will it scuff on a busy stair?
Limewash can mark where hands and bags rub. Keep the handrail clear of the wall and touch up with a damp brush of the same wash.