On this page
Key takeaways
- Expect visible seams and color shifts between strips; they are a property of the material, not a defect.
- Lay out and number every drop before pasting, and hang them in roll sequence so the shading changes gradually.
- Divide the wall into equal-width strips instead of ending in a skinny sliver, and keep joints at least 6 in from corners.
- Keep paste and water off the face entirely; one splash can leave a permanent mark on natural fibers.
- Order the whole job at once, inspect after three lengths, and stop if something looks wrong.
What you are actually buying
Grasscloth is a family name, not a single product. Most rolls are strands of grass, sisal, jute, abaca, paper-weave or bamboo laid across a paper backing and bonded with adhesive. Because people weave and dye the fibers in batches of natural material, no two strips are identical. Wolf-Gordon's installation guidelines say it plainly: expect color variation from panel to panel and within each panel, and knots, overlapping strands and varying thickness are inherent qualities rather than defects.
That single fact shapes everything else. With printed paper you are chasing an invisible seam. With grasscloth you are managing a visible one so it looks intentional. The reward is depth: woven fibers catch side light, soften sound a little and hide minor wall flaws better than a flat print. The price is a stricter hanging process and a product that does not forgive water, steam or careless paste.
Faux grasscloth, usually a printed or embossed vinyl, sits in between. It gives the look with tighter color consistency, often a straight or free match and a scrubbable face. If the wall is in a busy hallway, a kids' room or anywhere damp, the faux version is frequently the smarter call, and the rest of this guide's hanging cautions mostly relax.
| Material | Look | Seams | Best spot |
|---|---|---|---|
| Grass or arrowroot | Loose, glossy strands | Very visible | Bedroom or living room feature wall |
| Sisal | Fine, tight weave | Visible but quieter | Dining room, office |
| Jute or hemp | Chunky, rustic | Visible | Low-traffic accent walls |
| Paper-weave | Even, slightly crisp | Moderate | Where you want texture with less variation |
| Faux (vinyl) | Printed texture | Barely visible | Halls, kids' rooms, humid rooms |
Counting rolls: wide strips, simple maths
Most natural wallcoverings have no pattern to match, so the count is simpler than for a repeat print. In RoomBatch's wallpaper calculator choose free match: each drop is your wall height plus trim (4 in total by default), strips are wall width divided by roll width and rounded up, and drops are packed into rolls as whole lengths only. Openings are not deducted, which suits grasscloth well because you will want spare full-height pieces for shade sorting.
Take a common format of 36 in wide by 24 ft long and a 12 ft by 8 ft wall. Strips: 144 in divided by 36 in is exactly 4. Drop: 96 in plus 4 in trim is 100 in. A 288 in roll holds two 100 in drops with 88 in left over. Four strips plus one spare at a 10% allowance is five drops, which needs three rolls. The leftover 88 in pieces are too short for another drop, so they become patch stock.
Now try a 10 ft wall. 120 in divided by 36 in is 3.33, so the calculator says four strips. With no allowance that is four drops and two rolls. That four is right, but it hides a layout decision covered in the next section: you should not hang three full strips and a 12 in sliver.
| Wall | Strips | Drops with 10% spare | Rolls (36 in x 24 ft) |
|---|---|---|---|
| 10 ft x 8 ft | 4 | 5 | 3 |
| 12 ft x 8 ft | 4 | 5 | 3 |
| 12 ft x 9 ft | 4 | 5 at 112 in | 3 |
| 16 ft x 8 ft | 6 | 7 | 4 |
Plan equal-width strips, not a sliver at the end
Because every seam shows, the rhythm of the seams becomes part of the design. Wolf-Gordon recommends that the panels on each wall be of equal widths, without short strips at an end, and that vertical joints sit no closer than 6 in to inside or outside corners. A narrow piece next to a corner reads as a mistake from across the room.
On the 10 ft wall the fix is to divide 120 in by four and trim every strip to 30 in. You still buy the same rolls; you are just choosing where the waste goes. Trimming an edge means double-cutting or using a very sharp straightedge cut, so budget a little more time. On a 12 ft wall with 36 in rolls, the strips fall perfectly, which is one reason to measure before you fall in love with a width.
Centering also matters. If the wall has a bed, fireplace or console in the middle, decide whether a seam or the middle of a strip should sit on the centerline. The same thinking applies above doors and below windows: Wolf-Gordon advises avoiding narrow widths there too, so plan those fills from full-width offcuts rather than skinny trims.
- Measure the wall width at top, middle and bottom; use the widest figure.
- Divide by roll width, round up, then divide the wall evenly by that number of strips.
- Check that no joint lands within 6 in of a corner; shift the layout if it does.
- Mark seam positions lightly in pencil before you open any paste.
Sorting, numbering and the shade test
Wolf-Gordon's guidance is to acclimate the material in the room for at least 72 hours at 60 to 75 F with relative humidity at 50% or less, then precut panels to wall height plus 2 to 3 in. Cut each roll in sequence, number the backs in pencil and mark the tops. Then lay the drops out side by side and look at them under the light that will hit the finished wall.
Hang strips in the order they came off the roll so the color drifts gently instead of jumping. Many natural wallcoverings are hung straight, but the same guidance notes that alternate strips can be reversed, top to bottom, if that produces more even shading. Decide by eye on the floor, not by rule. If one roll is clearly darker, use it on the end of the wall, behind furniture or on a return.
Then hang three panels and stop. Wolf-Gordon states that if a defect, color variation or unacceptable pattern effect is visible after three panels are hung, you should contact them, and that claims are not accepted after more than three lengths are installed. Other makers have similar rules.
Paste, seams and the face of the material
Natural wallcoverings are usually unpasted. Wolf-Gordon calls for a heavy-duty clear premixed adhesive rolled onto the back, with no water added because it can loosen the backing, then booking the panel and letting it rest about three minutes. They also suggest brushing adhesive along the top and bottom of the wall and letting it tack to stop edges curling. Your product's instructions may differ, so read the sheet in the box first.
The face is the danger zone. Paste or water on grasscloth can stain the fibers permanently. If paste does get on the face, the guidance is to remove the excess with a dry cloth, let the rest dry and flake it off with a brush. Do not reach for a wet sponge as you would with vinyl. Smooth with a soft brush or plastic smoother, never a seam roller, which flattens the weave and discolors it. Butt seams tightly with no overlap and no gap.
Trim at the ceiling and baseboard with a fresh, sharp blade. Fibers drag on a dull one and leave a frayed line that is very hard to hide.
| Step | Printed paper habit | Grasscloth version |
|---|---|---|
| Cleaning paste off | Wet sponge | Dry cloth, then brush off when dry |
| Seams | Seam roller | Soft brush, light hand |
| Order of strips | Any order once matched | Strict roll sequence |
| Narrow fills | Fine if pattern matches | Avoid; plan equal widths |
| Wall prep | Primer | Pigmented wallcovering primer, even color |
Wall prep and where grasscloth does not belong
Because many weaves let the wall color peep through, an even, pigmented wallcovering primer matters more than usual. Wolf-Gordon also asks for clean, sound, dry walls and suggests tinting the primer toward the background color of the wallcovering on new plaster. A patchy white-and-gray wall can ghost through a loose jute.
Moisture is the deal-breaker. Wolf-Gordon says not to proceed if wall moisture content exceeds 4% or there is mold, condensation or active moisture. Tempaper's FAQ notes that its authentic grasscloth is not recommended for bathrooms because the material is absorbent. That rules out showers, steamy family bathrooms and sink splash zones. A powder room with no shower can work if the vanity wall is covered by something else.
Touch is the other limit. Grasscloth is dusted or vacuumed with a soft brush, and a slightly damp cloth is the most you should try on a stain. Choose it for the wall behind a bed, a dining room or an office, not the hallway that meets backpacks every morning.
- Good: bedroom headboard wall, living room feature wall, dining room, study.
- Think twice: kids' rooms, entry halls, behind a kitchen table.
- Avoid: showers, full bathrooms, kitchen backsplashes, exterior or damp walls.
Budget and reserve: buy it once
Natural fibers are made in dye lots and harvest batches, so a roll ordered next year may not match. Order every roll for the wall together, confirm the lot on each box when it arrives, and keep at least one spare drop's worth. On the 12 ft example that spare is already in the five-drop plan, plus the 88 in offcuts for small repairs.
Prices here are illustrative: natural grasscloth often runs several times the cost of a printed paper per roll, and many buyers also pay a professional hanger because the margin for error is thin. Use RoomBatch's finish cost comparison to see the wall next to paint, limewash and panels before deciding the texture is worth the premium.
Questions people ask
Are the seams in grasscloth supposed to be visible?
Yes. Natural grasscloth has no pattern to match and each strip varies in shade, so seams show. Good installation keeps them tight and evenly spaced, with equal-width strips and no joints within 6 in of corners, so they read as a deliberate rhythm.
How many rolls of grasscloth do I need for an accent wall?
Divide wall width by roll width and round up, then see how many full-height drops each roll gives. A 12 ft by 8 ft wall with 36 in by 24 ft rolls needs four strips plus a spare, at two 100 in drops per roll, so three rolls.
Can you put grasscloth in a bathroom?
Natural grasscloth is a poor match for steamy bathrooms because the fibers absorb moisture and water can stain them; Tempaper's FAQ advises against authentic grasscloth there. A faux grasscloth vinyl is the usual alternative for humid rooms.
Should grasscloth be reverse hung?
Some manufacturers say strips can be reversed top to bottom if that evens out shading, while others want a straight hang. Lay the cut drops out, look at them in your room's light, and follow the instructions supplied with your product.
How do you clean grasscloth wallpaper?
Dust it or vacuum with a soft brush attachment. A slightly damp cloth may lift a light stain, but do not soak or scrub it, because water can leave rings on natural fibers.
Terms in this guide
Sources & further reading
Planning information only. Product labels, manufacturer instructions and local codes take priority. Prices are illustrative. Read how we write and check guides in our editorial policy.