On this page
Key takeaways
- LRV runs from 0 (absorbs all light, theoretical black) to 100 (reflects all light, theoretical white). Real paints sit roughly between 3 and 94.
- The gap in LRV between an accent and its neighbors predicts how strongly the accent stands out: around 20 points reads as a clear but gentle step, 40+ as bold.
- LRV says nothing about undertone or temperature. Two colors with an LRV of 50 can look completely different.
- In dim rooms, deep colors (LRV under 15) look deeper still; in bright rooms, pale colors (LRV over 75) can wash out.
- Check LRV before you sample to narrow the field, then let the sample in your light make the final call.
What LRV measures
Light reflectance value is the share of visible light a surface reflects back. Scientific references describe it on a 0-to-1 scale; paint makers multiply by 100, so you see numbers like 62 or 9 on chips, fan decks and product pages. A color with an LRV of 62 reflects roughly 62 percent of the light that hits it.
Zero would be a perfect light trap and 100 a perfect mirror-white. Neither exists in a can. The brightest whites land in the high 80s to low 90s; the deepest blacks and inky navies sit in single digits.
LRV is about brightness only. It ignores hue (blue vs green), undertone (pink lean vs green lean) and saturation. Think of it as the volume knob, not the song.
The LRV bands that matter in a room
You do not need to memorize numbers. You need five bands and a feel for what each does to a wall. The ranges below are working rules of thumb used by designers, not a standard.
Most living spaces are painted in the 60–85 band. Accent walls usually live in one of two places: a mid-tone in the 25–50 band for a gentle step, or a deep color under 15 for drama.
| LRV band | What it looks like | Typical use | How it behaves |
|---|---|---|---|
| 80–94 | Whites and near-whites | Ceilings, trim, bright main walls | Bounces light; can glare in strong sun |
| 60–79 | Light neutrals and pastels | Main walls in most rooms | Brightens without stark white feel |
| 40–59 | Mid-tones | Soft accent, kitchens, halls | Visible color; still light-friendly |
| 15–39 | Deep mid-tones | Accent walls, dining rooms | Clear contrast; room feels more enclosed |
| 3–14 | Darks: charcoal, navy, forest, black | Dramatic accents, studies, bedrooms | Absorbs light; edges and corners soften |
Use the LRV gap to set contrast
The most practical way to use LRV is as a difference. Subtract the accent's LRV from the LRV of the walls around it. The bigger the gap, the louder the accent.
A gap of under 10 points reads as tone-on-tone. People may not notice it as an accent at all, which is lovely if you want quiet depth but disappointing if you wanted a feature. A gap of 15–30 reads as a clear, calm accent. A gap of 40 or more is a bold statement: deep green beside a light cream, charcoal beside white.
This is also how you keep a room from feeling chopped up. If the accent is very deep, repeat a mid-tone somewhere else, in a rug, cushions or a painted door, so the eye has a stepping stone between the two extremes.
- Under 10 points: tonal, subtle, almost invisible as an accent.
- 10–25 points: noticeable, relaxed, works in small rooms.
- 25–45 points: a proper feature wall.
- 45+ points: high drama; needs a mid-tone bridge elsewhere in the room.
Worked example: a sofa wall in a medium-bright living room
Take a living room with walls in a warm off-white at LRV 78. The sofa wall is 14 ft wide and 8 ft high, with no openings: 112 sq ft. A west window gives strong afternoon light; mornings are dim.
Option A is a muted green-grey at LRV 52. The gap is 26 points: a calm, visible accent that will look soft and light in the afternoon and slightly deeper in the morning. Option B is a deep olive at LRV 18. The gap is 60 points: bold, enveloping, and in the dim morning it will read close to brown-black.
The owner wants the sofa wall to feel like a backdrop, not a cave, and uses the room most in the morning with coffee. That points to a middle choice: a green at LRV around 32, a gap of 46. Deep enough to be a real feature, light enough to keep its green in morning light.
Quantity is the same for all three: 112 sq ft × 2 coats = 224 sq ft. At a typical 350–400 sq ft per gallon, one gallon covers it with room to spare. Deep colors sometimes need a tinted primer or a third coat, so check the label before assuming two.
What LRV does not tell you
LRV is measured under standard lab light on a flat sample. Your wall is not that. Sheen changes how light reflects: an eggshell or satin will look a touch brighter and show more sheen than a matte in the same color, even though the published LRV is the same.
Room size matters. A deep color on a small wall with little light looks deeper than its number suggests because there is less light to reflect in the first place. A pale color in a sunny south room can look nearly white.
And LRV says nothing about undertone. Two greys at LRV 50 can lean violet and green and will never look alike. Use LRV to narrow your shortlist, then judge undertone with samples in your room. Benjamin Moore's sampling advice — real paint, larger samples, viewed in different light — is still the final step.
Where to find the LRV of a color
Most major paint makers list LRV on the color's product page, on the back of larger chips or in fan decks. If it is missing, ask the paint desk; it is usually in their system. Write it next to the color on your shortlist so you can compare numbers before you buy samples.
If you cannot find a number, you can still rank colors by eye. Put chips on a white sheet, squint, and order them from lightest to darkest. Squinting removes hue and leaves brightness, which is roughly what LRV measures.
Quick decision rules
Before sampling, filter your candidates with these rules. They save money on samples you were never going to choose.
- Dim room, want it to feel lighter: keep main walls at 65+ and the accent at 35+.
- Dim room, want cozy: go all in under 15 and paint trim to match.
- Bright room, want visible color: keep the accent under 55 so it does not bleach out in sun.
- Small room: aim for an LRV gap of 15–30 rather than 50+, unless you are going fully dark.
- Open-plan: let one deep accent sit at least 30 points below the main color so it reads as a deliberate zone.
Questions people ask
What is a good LRV for an accent wall?
There is no single right number. For a gentle accent, choose something 15–30 points below your main walls (often LRV 35–55). For a dramatic accent, go under 15. Pick the gap first, then choose the color.
What LRV is considered dark paint?
Colors under about 15 behave as darks: charcoals, navies, deep greens and near-blacks. Between 15 and 40 is deep mid-tone. These are working bands rather than an official classification.
Does a higher LRV make a room look bigger?
Higher LRV walls reflect more light, which usually makes a room feel brighter and edges more visible. Deep colors can also make a small room feel larger in a different way by blurring corners, so the answer depends on the effect you want.
Is LRV the same in matte and eggshell?
Published LRV is for the color, measured under standard conditions. In a real room a higher sheen reflects a bit more light and shows more glare, so the same color can look slightly brighter in eggshell than in matte.
Why is LRV shown as a decimal in some places?
Scientific sources describe reflectance on a 0-to-1 scale. Paint makers usually multiply by 100 for convenience, so 0.62 and 62 mean the same thing.
Terms in this guide
See it worked out
Sources & further reading
Planning information only. Product labels, manufacturer instructions and local codes take priority. Prices are illustrative. Read how we write and check guides in our editorial policy.