roombatch

Budget & buyingBefore checkout

Accent Wall Shopping List: Everything to Buy, by Finish

The paint, paper or panels are the glamorous purchase. The project actually stalls on the tube of caulk, the box extender or the roller sleeve nobody wrote down. Build your list in the order the wall gets finished, mark what you already own, and you will make one trip instead of four.

8 min readPublished By the RoomBatch editorial team
On this page
  1. Key takeaways
  2. Build the list in the order the wall gets finished
  3. Preparation: every finish starts here
  4. Paint and limewash list
  5. Wallpaper list
  6. Panels and board-and-batten list
  7. A sample tally: what owning tools does to the total
  8. Lines that are not materials
  9. The day-before check
  10. Questions

Key takeaways

  • Write the list in work order: prepare, apply, edges, cleanup. Gaps become obvious.
  • Separate tools you own from consumables you must buy, and check the condition of both.
  • Small supplies round up too: a tiny wall still needs a whole tube, can or pack.
  • Tax, delivery, rental and labor are real lines. Give them a row, even if the value is zero.

Build the list in the order the wall gets finished

A good shopping list follows the work. Preparation first, then the finish itself, then edges and trim, then cleanup. Writing it in that order surfaces the gaps: you cannot get to 'roll coat 1' without something to patch the nail holes, and you cannot finish board and batten without caulk.

For each line, record four things: the quantity, the package size it comes in, the price you see, and whether you already own it. That last column turns a frightening total into a realistic one. The lists below are sized for the same 12 × 8 ft wall used throughout RoomBatch's guides, using RoomBatch's default 10% allowance. Treat quantities as a starting point and swap in your own calculator results.

Preparation: every finish starts here

Inspect the wall before buying prep products. A previously painted, sound wall might need only a wash and a few dabs of filler. A wall with old wallpaper, glossy paint or patched drywall needs more. Buying every prep product 'just in case' is its own kind of waste.

For wallpaper, ROMAN's FAQ explains that a suitable primer can help with positioning during hanging and with removal later, and points you to the wallpaper maker's adhesive recommendation. Use the instructions for your actual paper and wall; a product called 'wallpaper primer' is not automatically right for every installation.

Preparation: every finish starts here
ItemQuantity (12 × 8 ft)Own it?Notes
Drop cloths1 to 2Canvas grips better than plastic
Painter's tape1 rollCeiling, adjacent walls, baseboard
Lightweight filler and putty knife1 small tubFill nail holes, sand smooth
Sanding block, 120 and 220 grit1 eachAlso for trim projects
Mild cleaner, sponge, bucket1 setWash greasy or dusty walls
Primer (if needed)1 quart or gallonSpot prime patches; full prime for big color shifts
Bag for outlet cover screws1Breaker off before removing covers

Paint and limewash list

For two coats on 96 sq ft at 350 sq ft per gallon, the paint calculator rounds to one gallon. Two coats actually use about 192 sq ft of it, so a good share of the can is left for touch-ups. If your color is dark, check whether the label suggests a tinted primer, and plan the color's sheen before you buy; changing sheen later means another can.

  • Paint: 1 gallon (calculator result; round up, never down)
  • Angled sash brush, 2 to 2½ in
  • Roller frame and 2 sleeves with the right nap for your texture
  • Paint tray and liners
  • Extension pole
  • Stir sticks and a can opener
  • Limewash instead of paint: 1 container at 250 sq ft per container for two coats, a large block brush and a spray bottle

Wallpaper list

For 20.5 in paper with a 21 in repeat on a 12 × 8 ft wall, the wallpaper calculator gives 8 strips plus 1 spare, packed into 3 rolls. Order all rolls from the same batch and write the batch number on the list. Mismatched batches can differ in shade, and you will not see it until two strips sit side by side on the wall.

Wallpaper list
ItemQuantityOwn it?Notes
Wallpaper rolls3 (same batch)Confirm width, length, repeat and match
Paste (if not prepasted)As the paper maker specifiesCheck paste type for the paper
Wallpaper primer or sizing1 can, if specifiedDry before hanging
Snap-off knife and blades1 knife, 1 to 2 packsFresh blade every strip or two
Broad knife1Guides cuts at ceiling and baseboard
Smoother and seam roller1 eachPlastic smoother, not a brush, for most papers
Level or laser1For the first plumb line

Panels and board-and-batten list

With 2 × 8 ft panels the panel calculator gives 7 sheets; with a 5 ft board-and-batten treatment at about 16 in spacing it gives 15 eight-foot boards. The list below covers both. Fixing methods vary by product, so take the adhesive and fastener lines straight from the manufacturer's installation sheet. The Wood Veneer Hub, for instance, publishes installation documents per product range.

Panels and board-and-batten list
ItemPanelsBoard and battenNotes
Main material7 panels15 boards (8 ft)Check every piece on delivery
AdhesiveType and amount per maker1 to 2 tubesUse the type the maker names
FastenersScrews or nails if specifiedBrad nails, 1 boxLength to suit board + wall
Edge trimAs needed for exposed endsNoneOrder with the panels
Box extenders1 per outlet or switchOnly if boards cross a deviceSee the outlets guide
Filler and caulkLittle or none1 tub filler, 2 to 3 tubes caulkPaintable caulk
Paint for finished wallPer maker, if paintable1 gallonOne color for boards and wall

A sample tally: what owning tools does to the total

Here is how the 'own it?' column changes the picture for a painted 12 × 8 ft wall, with illustrative prices. Starting from nothing, the gallon of paint ($52) is joined by a brush, roller frame, two sleeves, a tray, a pole, tape, drop cloths and filler, which together can easily match or exceed the paint itself. If you already own the frame, pole, tray and cloths, the bill shrinks to the paint plus fresh sleeves, tape and filler.

The same logic applies more strongly to board and batten. A miter saw and nailer you own or borrow turn a several-hundred-dollar tool bill into nothing, leaving boards, nails, filler, caulk and paint. That is why two people quoting the 'same' accent wall can be hundreds of dollars apart and both be right.

  • First project, no tools: budget supplies at roughly the price of the finish for paint.
  • Returning DIYer: supplies are mostly consumables, a fraction of the finish cost.
  • Trim projects: tool access is the biggest swing in the budget.

Lines that are not materials

Some costs are not things you put in a cart but still belong on the list. Give each a row, even if the answer is zero. That way your total is a total.

  • Sales tax on materials
  • Delivery or curbside pickup fees (panels and long boards often cost more to ship)
  • Tool rental for a miter saw or nailer
  • Labor, if any part of the job is hired out
  • A sample or two before the full order
  • A small contingency for one extra store run

The day-before check

Lay everything on the floor of the room. Read each line against what is there. Open the paint can lid and check the color on the lid matches your chip. Unroll the first foot of each wallpaper roll and check batch numbers match. Count panels and boards against the delivery note. Ten minutes of this is the cheapest insurance in the whole project.

Questions people ask

What do I need to buy for an accent wall?

The finish itself (paint, wallpaper, panels or boards), preparation supplies (filler, sandpaper, cleaner, tape, drop cloths, maybe primer), application tools for that finish, edge supplies like caulk or trim, and cleanup items. Add tax, delivery and any rentals as separate lines.

How much paint do I need for one accent wall?

For a typical 12 × 8 ft wall, about one gallon covers two coats with an allowance to spare. Use net area × coats × (1 + allowance) ÷ label coverage, then round up.

What supplies do I need for board and batten?

Primed boards (about 15 eight-foot boards for a 12 ft wall at 5 ft high), brad nails, construction adhesive, wood filler, paintable caulk, sandpaper and paint. Tools include a saw for square cuts, a nailer or hammer, a level and a stud finder.

Do I need primer for an accent wall?

Not always. Spot-prime patches; consider a full primer coat for big color changes, glossy surfaces or new drywall. Wallpaper often needs a specific primer or sizing; follow the paper maker's instructions.

Should I buy extra wallpaper rolls?

Buy enough for your strips plus at least one spare drop, all from one batch. A later reorder may come from a different batch with a slightly different shade.

Terms in this guide

Sources & further reading

  1. ROMAN Products: wallpaper preparation, primer and adhesive FAQs (opens in a new tab)
  2. ROMAN Products: technical data sheets (opens in a new tab)
  3. The Wood Veneer Hub: Panel installation and technical guides (opens in a new tab)
  4. Benjamin Moore: U.S. online return and shipping policy (opens in a new tab)

Planning information only. Product labels, manufacturer instructions and local codes take priority. Prices are illustrative. Read how we write and check guides in our editorial policy.

Was this guide useful?